• TOP GLASS - Remove the top glass by opening the main door of the slot machine and carefully lift the old glass holder up and out of the cabinet frame. Replace with the new top glass.
  
  
• REEL GLASS - First you will have to remove the florescent bulb and fixture to remove the reel glass. There are screws holding the fixture in place. Once removed, grab the old reel glass on both sides and pull it out of the lower holder and carefully replace with the new glass.
  
  
• BELLY GLASS - Replace the belly glass by locating the glass door release knob located on the main door. Pull the know straight out and flip the frame of the lower glass assembly down. Remove the small screws from the light and glass holder and slide the old glass out of the machine. Before tightening the screws back down, make sure the new glass is right side up when the assembly is closed.
  
  
• REEL STRIPS - Each of the 3 reel strips has a number on the bottom of the strip. THE STRIPS MUST BE PLACED ON THE CORRECT REEL BASKET (lowest number to be placed on the left reel basket, etc.). Make sure they are matched correctly. Small notches are cut in the strips near the bottom and a matching notch is on each reel basket. Locate the notches in the reel baskets by placing a reel strip into the left side groove of the reel basket and hold the strip at a 45 degree angle to the basket with one hand and rotate the reel basket slowly with the other hand until you feel it catch on the notch. Then roll the strip around the back side of the reel basket and tuck both sides into the grooves of the reel basket around to where you started.
  

Feel free to call or email if you have any questions concerning the glass kit installation.

Home | Products | Services | Policies | About Us | Contact Us